LTP Cement, Grout and Salt Residue Remover 1L

Tiles Direct

Product ID: 12642

Rs.19.99
RRP Rs.25.99
|
You save up to 23 %

Item in Stock | Usually dispatched within 2-3 working days

Colour: Clear

Size (ml): 1000ml

Approximate Coverage: Mild cases, up to 30m2. More severe cases, up to 10m2. Extremely severe cases, up to 5m2

Suitability: For all types of unpolished natural stone, porcelain, glazed ceramic, slate, quarry tiles, brick, terracotta and granite

You can use the LTP Coverage Calculator to confirm how much you will need of this product.

The Technical Data sheet can be found here.

NOTE: Not suitable for use on surfaces that are polished (i.e. polished marble, travertine or limestone). Any contaminated surface should be rinsed off immediately with plenty of clean water. Do not use when underfloor heating systems are in operation. Mask and protect any surface not to be cleaned.

Interior and Exterior use: A rapid action cleaning agent for removing cement residues, grout stains, salts, efflorescence and other similar deposits. May also be used in dilute or concentrated form. Does not affect chrome or stainless steel fixtures or fittings.

Directions for use: Always test/practice on an inconspicuous area before proceeding to ensure that the finished result is satisfactory. Shake container well before use. Always rinse with cool clean water after use.

In mild cases and on non-absorbent surfaces: Dilute 1 part LTP Cement, Grout and Salt Residue Remover in 4 parts cool water. Apply with a cloth or sponge wrung out in the solution. Leave for up to 15 minutes. Extract released residues using a sponge and water.

In more severe cases: Dilute 1 part LTP Cement, Grout and Salt Residue Remover in 1 part cool water. Apply liberally and spread over the surface. If necessary, agitate with a nylon scrubber, scrubbing brush or rotary scrubbing machine and leave to react for 5-10 minutes, keeping surfaces wet with additional solution. Extract and rinse thoroughly with clean water.

In extremely severe cases: Dampen the surface to be cleaned with water and apply undiluted. Agitate with a nylon scrubber, scrubbing brush or mechanical scrubber. Immediately extract and rinse thoroughly with clean water.