Rubi Delta Tile Levelling System 1.5mm Short Clips (200 Pcs)

The main function of the RUBI Delta levelling system is to avoid the creation of installation eyebrows during the installation of ceramic tiles, both on floors and walls.

The RUBI Delta levelling system also prevents the movement of the tiles during the setting of the adhesive and, during installation, the number of corrections in the position of the ceramic tile itself is reduced.

The basic principle of the RUBI Delta levelling system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.

The RUBI Delta levelling system is a system of wedges and flanges, recommended for formats of 30x30 cm or greater and varied thicknesses of up to 12, 15 or 20mm, depending on the model of flange used.

The use of the RUBI Delta levelling system is fast, easy and intuitive. Once the installation is complete, the elements of the system are removed by impact (kick or mace), striking the flanges always in the direction of the joint.

The RUBI Delta levelling system clamp is designed to be used both in installation work of horizontal (floor) and vertical (cladding) ceramic tiles. The main function of the RUBI Delta levelling system is to give the wedge the necessary pressure to allow the levelling of the ceramic tile; thus obtaining a homogeneous resulting flatness.