LTP Grimex 1L

Tiles Direct

Product ID: 6914

Rs.8.99
RRP Rs.12.99
|
You save up to 30 %

Item in Stock | Usually dispatched within 2-3 working days

Colour: Clear

Size (ml): 1000ml

Approximate Coverage: Mild cases, up to 50m2. More severe cases, up to 20m2. Extremely severe cases, up to 10m2

Suitability: Suitable for travertine, limestone, sandstone, slate, marble, porcelain, graine terracotta, quarry tiles, brick and external paving. Effective for removing oil, grease, ingrained dirt grime and old wax layers.

You can use the LTP Coverage Calculator to confirm how much you will need of this product.

The Technical Data sheet can be found here.

NOTE: This product should not be used for every day cleaning of floors or walls that have been sealed. Cleaned surfaces that have been previously sealed should be re-sealed after using this product. This should be done after rinsing with plenty of clean water, once surfaces have had sufficient time to thoroughly dry (minimum 24 hrs)

Interior and Exterior use: Suitable for travertine, limestone, sandstone, slate, marble, porcelain, graine terracotta, quarry tiles, brick and external paving. Effective for removing oil, grease, ingrained dirt grime and old wax layers. But please ensure you test on an inconspicuous area before general application.

Directions for use in mild cases and on absorbent tiles: Dilute 1 part Grimex in 3 parts warm water. Apply with a damp cloth or mop. Wipe off thoroughly with a clean damp cloth.

In more severe cases: Dilute 1 part Grimex in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary, agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water.

In extremely severe cases: Use unfiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.