LTP Grout Haze and Limescale Remover 500ml

Tiles Direct

Product ID: 20160

Rs.6.99
RRP Rs.14.99
|
You save up to 53 %

Item in Stock | Usually dispatched within 2-3 working days

Colour: Clear

Size (ml): 500ml

Approximate Coverage: Cement based grout films, up to 10m2. Limescale and hardwater stains, up to 15m2

Suitability: Used as a first wash cleaner for removing cement-based grout haze from the surface of tiles without affecting the joint

You can use the LTP Coverage Calculator to confirm how much you will need of this product.

The Technical Data sheet can be found here.

NOTE: Not suitable for use on stone surfaces that are polished (ie. polished marble, travertine or limestone). Sealed natural stone surfaces should be re-sealed after cleaning with this product.

Interior and Exterior use: For use on all types of glazed and polished porcelain, glazed ceramic, slate, quarry tiles, brick, mosaics, terracotta, granite and unpolished natural stone.

Directions for use: Always test/practice on an inconspicuous area before proceeding to ensure that the finished result is satisfactory. Shake container well before use.

Removing grout films: Wait for the grout to 'firm off' in the joint before application. Spray and wipe the surface using a micro-fibre cloth. Rinse the cloth in water, wring out and repeat until the surfaces are free from cement residues.

For older stubborn residues, spray on and scrub immediately using a white nylon scrubbing pad. Wipe away the released residues using a micro-fibre cloth. No need to rinse.

Removing hard water stains and limescale: Spray onto the surface and scrub immediately using a white nylon scrubbing pad. Wipe away the released residues using a micro-fibre cloth. Rinse and leave to dry.