LTP Ironwax Satin 1L

Tiles Direct

Product ID: 6923

Rs.14.99
RRP Rs.19.99
|
You save up to 25 %

Item in Stock | Usually dispatched within 2-3 working days

Colour: Clear

Size (ml): 1000ml (also available in 5000ml)

Approximate Coverage: 15-30m2 per litre (one coat) depending on substrate porosity

Suitability: For travertine, slate, limestone, sandstone, bricks, terracotta, unpolished marble, porous quarries, terrazzo and concrete. Suitable for domestic and commercial use

You can use the LTP Coverage Calculator to confirm how much you will need of this product.

The Technical Data sheet can be found here.

NOTE: Not suitable for external use or wetrooms and shower enclosures. Avoid shaking bottle prior to use, frothing may lead to an inconsistent finish. Avoid extreme temperature. The product may not adhere to highly vitrified quarry tiles or ceramics. Avoid using strong detergents to wash treated surfaces. On higher porosity floor materials, LTP Mattstone H2O may be required.

Interior use only: Low maintenance self-shine satin finish film forming acrylic sealer. Enhances colour and texture, protects against staining and stubborn dirt, easy to maintain.

Directions for use: Ensure the surface to be treated is completely clean, dry (minimum 24 hours). Any retained moisture may cause the LTP Ironwax Satin to dry opaque or prevent the seal from reaching full hardness. Pour contents into a separate container.

Rough cut, textured or riven surfaces: Use a sponge or paint brush to apply a thin coat evenly in one direction. Do not rub or buff. Allow to dry (1 hour). Apply until an evenly thin film is created (average. 3 times). For a higher sheen, further coats should be applied at right angles to the previous (maximum 6).

Honed and smooth surfaces: Apply using a J cloth or sealant applicator pad. Apply a thin coat evenly to the surface without rubbing. Apply until an evenly thin film is created (average 3 times). For a higher sheen, further coats should be applied at right angles to the previous (maximum 6).

Aftercare: Routinely sweep the floor. Use LTP Floorshine to clean and protect treated surfaces. In areas where the seal becomes worn, apply more LTP Ironwax Satin. At some stage, complete renovation of the deal may be desired. In this case, use LTP Grimex to strop the original seal before resealing.