Mapei Kerapoxy CQ 100 White Grout 3kg

Tiles Direct

Product ID: 12209

Rs.47.99
RRP
|
You save up to %

Item in Stock | Usually dispatched within 2-3 working days

Colour: White

Size (kg): 3kg

Approximate coverage: 2-4m2

Suitability: Internal and external grouting of ceramic, stone material and glass mosaic floor finishes. Particularly suitable for grouting large areas where easy application and cleaning is required

Colour-matched silicone available under product ID 6903

You can use the Mapei Coverage Calculator to confirm how much you will need of this product.

The Technical Data sheet for this item can also be found here

Features:

Excellent mechanical and chemical resistance
Smooth final surface which is non-absorbent - easy to clean and hygienic
Becomes very hard and is highly resistant to heavy traffic
No shrinkage
Uniform colours that are resistant to ultra-violet rays and atmospheric agents

Preparation of the joints: Joints must be dry, clean, free of dust and emptied at least 2/3 of the tile thickness. Excess adhesive or mortar should be removed while still fresh. Before grouting, make sure that the installation mortar or the adhesive has set and released most of its moisture.

Preparation of the mix: Pour the catalyser (part B) into the container of Part A and mix well until a smooth paste is obtained. We recommend using a low-speed electric mixer to guarantee perfect blending, and to avoid overheating of the mix which would reduce working times. Use the mix within 45 minutes of preparation.

Application: Spread Kerapoxy CQ over the tiled surface with a special rubber grout float, making sure that the joints are filled right down to the bottom. With the edge of the same float, strike off excess material.

Finishing: After grouting, floor finishes must be cleaned while the grout is still fresh. Cleaning may be carried out using a small amount of water and an abrasive sponge, followed by a cellulose sponge.