LTP Solvex 1L

Tiles Direct

Product ID: 11228

Rs.12.99
RRP Rs.19.99
|
You save up to 35 %

Item in Stock | Usually dispatched within 2-3 working days

Colour: Clear

Size (ml): 1000ml

Approximate Coverage: Light stripping, 8-10m2. Deep stripping, 5m2

Suitability: For stone, travertine, terracotta, slate, sandstone, flagstone, quarry tiles, glazed ceramics and porcelain

You can use the LTP Coverage Calculator to confirm how much you will need of this product.

NOTE: Protect acrylic surfaces such as baths and shower trays from contact. Make sure to avoid prolonged contact with the joint as well if removing residues from epoxy grout.

Interior and Exterior use: Removes silicone and acrylic waxes, adhesive polymers and epoxy grout residues.

For stone, travertine, terracotta, slate, sandstone, flagstone, quarry tiles, glazed ceramics and porcelain.

A powerful non-caustic stripper that softens most types of surface sealer, which can then be removed with ease. Suitable for removing most wax, oil, silicone, acrylic, polyuerthane sealers and residual epoxy grout. After washing and rinsing, surfaces are ready for resealing.

Directions for use: Pour contents into a class or metal container (not plastic) and apply generously by dabbing on with a cloth or brush. Work in manageable areas of no more than 5 square meters and do not brush out. Leave up to 30 minutes but don't allow the solution to dry out. If drying should occur within 30 minutes, apply a little more solution.

Use a course, stiff brush or an abrasive pad to remove softened coating from the surface.

Repeat the process if unwanted material remains. Wash down with a dilute solution of LTP Grimex, rinse with plenty of water and leave to dry (minimum of 24 hours) before resealing.

Use natural fibre brushes. Brushes made from synthetic fibres may be damaged by this product.

If you're unsure of the correct application methods, test on an inconspicuous area prior to general application.