Mapei Ultraflex S2 Quick Grey 15kg

Tiles Direct

Product ID: 7165

Rs.38.99
RRP
|
You save up to %

Item in Stock | Usually dispatched within 2-3 working days

Colour: Grey

Size (kg): 15kg

Coverage: 1.5-2.5kg per 1m2 (maximum bed depth of 10mm)

Suitability: Ideal for bonding all sizes and types of ceramic, porcelain and non-moisture sensitive natural stone tiles and mosaics to internal and external walls and floors

The Technical Data sheet for this item can also be found here

Note: Do not use on metallic, rubber, PVC or linoleum surfaces. Don't use with marble or artificial composite material subject to considerable movement in the presence of humidity. Do not apply directly over underfloor/under tile heating systems. Pipes or heating cables must be encapsulated in either a suitable screed or smoothing compound. Do not add more water to the mix once it has started to set.

Preparation of the substrate: The substrate must be mechanically strong, dry and free from crumbling parts, grease, oil, paint and wax. Generally, cementitious substrates used for laying ceramic must not be subject to shrinkage once the tiles have been laid. Since Ultraflex S2 Quick is particularly flexible, it is able to compensate for micro-cracks which form in the screed if it is not sufficiently cured. Meaning that standard sand/cement screeds can be tiled over with ceramic or porcelain tiles and mosaics once the screed is foot trafficable without leaving indentations. Gypsum substrates and anhydrite screeds must be perfectly dry, sufficiently hard, free from dust and, in all cases, treated with Primer G or Eco Prim T Plus.

Mixing: Blend 15kg of the powder with 5.1-5.4l of clean water until a smooth, lump-free paste is obtained. Leave the mix standing for 5 minutes, then re-mix. The mix prepared as above lasts approximately 30 minutes.

Applying the product: Apply with a notched trowel. Use a trowel which guarantees perfect buttering of the back of the tile. To obtain a good bond, spread a thin layer on the substrage using the smooth side of the trowel, then immediately spread a further layer to the thickness required using the notched side. When laying floors, tiles in wet areas and on external surfaces, spread the adhesive on the back of the tile to guarantee total buttering.